Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 2299

You cannot specify a view-name for su, which has access to the whole MIB. You can use the view name to restrict the access rights of a community string. When it is specified: • An internal security name is generated. • The internal security name for SNMPv1 and SNMPv2 security models is mapped to an internal group name. • The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view name. If ro is specified, then read-view and notifyview are mapped. If rw is specified, then read-view, notify-view, and write-view are mapped. The community name may include any printable characters except a question mark, an at sign, or a backslash. Enclose the string in double quotes to include spaces within the name. The surrounding quotes are not used as part of the name. The CLI does not filter illegal characters and may accept entries up to the first illegal character or reject the entry entirely. Command History Modified in version 6.5 firmware. Example The following example configures community access string public to permit administrative access to SNMP at an administrative station with IP address 192.168.1.20. console(config)# snmp-server community public su ipaddress 192.168.1.20 snmp-server community-group Use the snmp-server community-group command in Global Configuration mode to map the internal security name for SNMP v1 and SNMP v2 security models to the group name. To remove the specified community string, use the no snmp-server community command. Syntax snmp-server community-group community-string group-name [ipaddress ipaddress] no snmp-server community-group community-string Switch Management Commands 2299