Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 1529

Example The following example enables the circuit ID and remote agent ID options. console(config)#ip dhcp relay information option ip dhcp relay information option-insert Use the ip dhcp relay information option-insert command in Interface Configuration mode to enable the circuit ID option and remote agent ID mode for BootP/DHCP Relay on the interface (also called option 82). Use the no form of the command to return the configuration to the default. Syntax ip dhcp relay information option-insert [none] no ip dhcp relay information option-insert • none-Use to disable insertion of circuit id and remote agent id options into DHCP requests forwarded to the DHCP server. Default Configuration Disabled is the default configuration. Command Mode Interface (VLAN) Configuration mode User Guidelines Enable DHCP Relay using the ip helper enable command. The interface configuration always takes precedence over global configuration. However, if there is no interface configuration, then global configuration is followed. Use the ip dhcp relay information option command to globally enable inclusion of Option 82 information in DHCP requests forwarded to a DHCP server. Example The following example enables the circuit ID and remote agent ID options on VLAN 10. console(config)#interface vlan 10 console(config-if-vlan10)#ip dhcp relay information option-insert Layer 3 Routing Commands 1529