Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 1432

Prefixes Advertised Prefixes Withdrawn Prefixes Current Max NLRI per Update Min NLRI per Update A running count of the number of prefixes advertised to or received from this neighbor A running count of the number of prefixes included in the Withdrawn Routes portion of UPDATE messages, to and from this neighbor The number of prefixes currently advertised to or received from this neighbor The maximum number of prefixes included in a single UPDATE message, to and from this neighbor The minimum number of prefixes included in a single UPDATE message, to and from this neighbor If the router receives an UPDATE message with an invalid path attribute, the router will in most cases send a NOTIFICATION message and reset the adjacency. BGP maintains a per-neighbor counter for each type of path attribute error. This show command lists each non-zero counter, just after the LastSubError. The counters that may be listed are as follows: Counters Description Path with duplicate attribute The peer sent an UPDATE message containing the same path attribute more than once. Path with wellknown/optional conflict A received path attribute was flagged as both wellknown and optional or neither well-known nor optional. Transitive flag not set on A received path attribute is known to be transitive, but transitive attr the transitive flag is not set. Mandatory attribute non- A mandatory path attribute was received with either the transitive or partial transitive or partial flag set. Optional attribute nontransitive and partial An optional path attribute has the transitive flag clear and the partial flag set. Path attribute too long A received path attribute was longer than the expected length. Path attribute length error A received path attribute has a length value that exceeds the remaining length of the path attributes field. Invalid ORIGIN code A received UPDATE message included an invalid ORIGIN code. Layer 3 Routing Commands 1432