Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 532

GVRP Commands Dell Networking N1108EP-ON/N1500/N2200-ON/N3200-ON Series Switches GARP VLAN Registration Protocol (GVRP) is used to propagate VLAN membership information throughout the network. GVRP is based on the Generic Attribute Registration Protocol (GARP), which defines a method of propagating a defined attribute (that is, VLAN membership) throughout the network. GVRP allows both end stations and the networking device to issue and revoke declarations relating to membership in VLANs. End stations that participate in GVRP register VLAN membership using GARP Protocol Data Unit (GPDU) messages. Networking devices that implement the GVRP protocol and enable GVRP then process the GPDUs. The VLAN registration is made in the context of the port that receives the GPDU. The networking device propagates this VLAN membership on all of its other ports in the active topology. Thus, the end station VLAN ID is propagated throughout the network. GVRP is an application defined in the IEEE 802.1p standard that allows for the control of 802.1Q VLANs. clear gvrp statistics Use the clear gvrp statistics command to clear all the GVRP statistics information. Syntax clear gvrp statistics [interface-id] • interface-id-An Ethernet interface identifier or a port channel identifier Default Configuration This command has no default configuration. Command Mode Privileged Exec mode User Guidelines This command has no user guidelines. Layer 2 Switching Commands 532