Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 993

which requires an enable password. If users are unable to enter privileged mode when accessing the switch via telnet or SSH, the administrator will need to either change the enable authentication method, e.g. to enableList, or set an enable password. If the encrypted parameter is specified, the password parameter is stored as entered in the running-config. No attempt is made to decode the encrypted password. To use the ! character as part of the username or password string, it should be enclosed within quotation marks. For example, username "test!xyz" password "test!xyz". SHA256 and SHA512 use the FreeBSD's crypt function for password encryption. Salt is a 16-character string chosen randomly from the set [a-zAZ0-9./]. The 16-character salt is also part of the encrypted password. Salt is not applicable for the MD5 encryption-type. Password history is not effective if the password of a non-default encryption type is used. Example The following example defines password "xxxyyyzzz" to control access to user and privilege levels. console(config)# enable password xxxyyyzzz The following example uses an encryption type password. console(config)#enable password $1$9glco178$/7q5ujUCNZy9tvDzqk9tz/ encrypted encryption-type md5-salt Command History Command updated in version 6.8 firmware. ip admission proxy http redirect-url Use this command to configure a URL to which HTTP or HTTPS requests are directed. Syntax ip admission proxy http redirect-url url no ip admission proxy http redirect-url Security Commands 993