Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 2073

Option 125 strings must conform to the relevant TLV format as specified in RFC 3925 beginning with a 2 byte pad filled in by the switch (option code 125 and option length), the 2 byte enterprise number, the data length and the sub-option values. For example, option 125 might be written on the command line as: option 125 hex 0000.02a2.1205.1061.7574.6f69.6e73.7461.6c6c.5f64.6863.70 which translates to: • 0x0000 - Two byte pad filled in by switch (option-code 125 and option-len) • 0x02A2 - Dell Vendor code 674 • 0x12 - TLV length - 18 bytes • 0x05 - Sub-option code 5 • 0x10 - Sub-option length - 16 bytes • 0x6175746f696e7374616c6c5f646863.70 - Sub-option value "autoinstall_dhcp" Options that accept only fixed length strings need only have the relevant data bytes specified on the command line. The switch will build the TLV and insert the specified data bytes into the option. Refer to the relevant documentation for the DHCP client to identify what information, if any, is accepted by the client in DHCP Option 125. Table 7-1 lists the other options that can be configured and their fixed length, minimum length, and length multiple requirements. Refer to the relevant documentation for the DHCP client to identify what information, if any, is accepted by the client for the options listed below. Table 7-1. Option Codes and Lengths Option Code 2 (Time Offset) 4 (Time Server) 7 (Log Server) 8 (Cookie Server) 9 (LPR Server) 10 (Impress Server) Fixed Length 4 - - - - - Minimum Length Multiple Of - - 4 4 4 4 4 4 4 4 4 4 Switch Management Commands 2073