Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 1383

no network prefix mask network-mask [route-map rm-name] network ipv6-prefix/prefix-length [route-map rm-name] no network ipv6-prefix/prefix-length • prefix-An IPv4 address prefix in dotted decimal notation. • network-mask-The network mask for the prefix in dotted-quad notation (e.g., 255.255.0.0) where a zero bit in the mask indicates a don't care condition for the corresponding address bits. • ipv6-prefix-An IPv6 network prefix. This argument must be in the form documented in RFC 2373 where the address is specified in hexadecimal using 16-bit values between 0x00 and 0xff and separated by colons. • prefix-length-The length of the IPv6 prefix given as part of the ipv6prefix. Required if a prefix is specified. A decimal value in the range 1 to 128 that indicates how many of the high-order contiguous bits of the address comprise the prefix (the network portion of the address) in /length format. A slash mark must precede the decimal value in /length format. • rm-name-The name of a route map used to filter prefixes or set attributes of prefixes advertised by this network. The route map statements are evaluated in order, and the first match terminates processing of the route map. If the specified route map does not exist, the network prefix is not advertised (all routes are denied). Default Configuration No networks are advertised by default. Command Mode BGP Router Configuration, BGP Router VRF Configuration User Guidelines BGP supports up to 64 networks. The network command may also be used specify a default route (network 0.0.0.0 mask 0.0.0.0). If a route map is configured to set attributes on the advertised routes, match as-path and match community terms in the route map are ignored. A match ip-address prefix-list term is honored in this context. If the route map Layer 3 Routing Commands 1383