Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 1789

Metric Type Shows whether the metric for the default route is advertised as External Type 1 or External Type 2. Number of Active The number of OSPF areas to which the router is attached on Areas interfaces that are up. ABR Status Shows whether the router is an OSPF Area Border Router. ASBR Status Indicates whether the router is an autonomous system border router. Router automatically becomes an ASBR when it is configured to redistribute routes learned from another protocol. The possible values for the ASBR status is enabled (if the router is configured to redistribute routes learned by other protocols) or disabled (if the router is not configured for the same). Stub Router Status One of Active or Active. Stub Router Reason One of Configured, Startup, or Resource Limitation. This row is only listed if stub router is active. Stub Router Time The remaining time until OSPF exits stub router mode. This Remaining row is only listed if OSPF is in startup stub router mode. External LSDB Overflow OSPF enters this state when the number of external LSAs exceeds a configured limit, as described in RFC 1765. External LSA Count Shows the number of external (LS type 5) link-state advertisements in the link-state database. External LSA Checksum Shows the sum of the LS checksums of external link-state advertisements contained in the link-state database. AS_OPAQUE LSA Shows the number of AS Opaque LSAs received. Count AS_OPAQUE LSA Sum of the checksums of all AS Opaque LSAs in the link state Checksum database. New LSAs Originated Shows the number of link-state advertisements that have been originated. LSAs Received Shows the number of link-state advertisements received determined to be new instantiations. LSA Count The number of LSAs in the link state database. Maximum Number The limit on the number of LSAs that the router can store in its of LSAs link state database. Layer 3 Routing Commands 1789