Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 450

Syntax show interfaces status Default Configuration This command has no default configuration. Command Mode Privileged Exec mode, Global Configuration mode and all Configuration submodes User Guidelines Port channels are only displayed if configured. Use the show interfaces portchannel command to display configured and unconfigured port channels. Interfaces configured as stacking ports will show as detached in the output of the show interfaces status command. The link state indicates the physical connectivity state of the link. It is possible that the link is connected physically yet frames are not able to pass over the link. Possible causes of this condition are speed or duplex mismatch. The displayed port status information includes the following: Field Port Description Duplex VLAN Speed Neg Description The port or port channel number. Oob means Out-of-Band Management Interface. Description of the port. This field may be truncated in the command output. Displays the port Duplex status. The VLAN membership for the port is enclosed in parentheses. The currently active PVID and Voice VLAN ID, if any, are also shown. In some cases, the PVID assigned may not be the configured PVID, for example, when RADIUS assigns a PVID to the interface. Refers to the port speed. Describes the Auto-negotiation status. Layer 2 Switching Commands 450