Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 154

802.1x Command Description Modea dot1x eapolflood Enables the flooding of received IEEE 802.1x GC frames in the VLAN. clear authentication sessions Begins the initialization sequence on the PE specified port. mab Enables MAB on an interface. IC default mab Configures the switch to transmit EAP, PAP, or IC CHAP credentials to the RADIUS server for MAB-authenticated devices connected to the interface. mab request format attribute 1 Configures the format of the MAC address sent IC, in the User-Name attribute. GC mab request format attribute 2 Overrides the password sent in MAB Access GC Requests. dot1x max-reauth-req Sets the maximum number of times that the IC switch sends Extensible Authentication Protocol EAP-Request/Identity frames to which no response is received before restarting the authentication process. dot1x max-req Sets the maximum number of times the switch IC sends an EAP-request frame to the client before restarting the authentication process. dot1x max-start Configures the number of EAPOL start frames IC that the switch supplicant sends to initiate authentication before it concludes that there is no authenticator connected. dot1x pae Enables 802.1X on an interface and sets the IC interface role. authentication host-mode Configures the host mode of an interface. IC authentication max-users Sets the maximum number of clients supported IC on the port when multi-auth authentication is enabled on the port. authentication port-control Enables manual control of the authorization IC state of the port. 154 Dell Networking CLI