Dell N3200-ON Networking N-Series Switches CLI Reference Guide version 6.8.0 - Page 2031

• hostname - Hostname of the server. (Range: 1-256 characters). The command allows spaces in the host name when specified in double quotes. Each label in the host name is limited to 63 characters. • filepath - The path to the file on the server or USB drive or an absolute or relative path on the switch. This is an optional parameter that should only be entered if needed. • filename - The name of the file on the server or USB drive (source-url). The filename parameter is required for the tftp, ftp, scp, sftp, flash and usb destination URLs. For an application, if the optional filename parameter is given for an archive in the destination url, it must have a .tar or .tgz extension. If the destination filename is not given, the filename is extracted from the source url. If the filename has a .tar or .tgz extension, the archive is unpacked in the user-apps directory and deleted after unpacking. If there is an error during unpacking, the file is deleted anyway. If the file name does not include a .tar or .tgz extension, it is simply copied into the user-apps directory as is. • username - The user name for logging into the remote server via SSH. • crashlog#-Indicates the index of the log on the local or remote unit (Range 0-4). Index 0 indicates the most recent crash log. Index 4 specifies the oldest crash log. • unit-Indicates the stack unit number from which to retrieve the log. If no unit is specified, the file is copied from the management unit in the stack. • kernel-Only copies the kernel crash log. • data-Only copies the crash summary data. The following table lists and describes reserved keywords. Reserved Keyword application running-config startup-config startup-log Description Represents an application. Represents the current running configuration file. Represents the startup configuration file. Represents the startup SYSLOG file. This can only be the source of a copy operation. Switch Management Commands 2031