Dell OptiPlex GX260 User Guide - Page 127
CAUTION: Safety, Instructions, To guard against electrical shock
View all Dell OptiPlex GX260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Back to Contents Page Opening the Computer Cover Dell™ OptiPlex™ GX260 Systems User's Guide CAUTION: Before you begin any of the procedures in this section, follow the steps in "CAUTION: Safety Instructions." CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. 1. Perform an orderly computer shutdown using the operating system menu. NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack. 2. Turn off any attached devices and disconnect them from their electrical outlets. 3. Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board. 4. If you have installed a padlock through the padlock ring on the back panel, remove the padlock. NOTICE: Ensure that sufficient space exists to support the open cover-at least 30 cm (1 ft) of desktop space. 5. Lay the computer on its side as shown in the illustration. 6. Open the cover: a. Facing the back of the computer, press the release button on the right side of the computer with one hand while pulling up on the top of the cover with the other hand. b. Press the release button on the left side of the computer with one hand while pulling up on the top of the cover with the other hand. c. Hold the bottom of the computer with one hand, and then pull open the cover with the other hand. Opening the Cover