Dell OptiPlex GX260 User Guide - Page 58
Primary Drive, Exit system setup, and reboot the computer.
View all Dell OptiPlex GX260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
1 power cable 2 hard-drive cable 5. Check all connectors to be certain that they are properly cabled and firmly seated. 6. Close the computer cover. 7. Attach the computer stand (optional). NOTICE: To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer. 8. Connect your computer and devices to their electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 9. If the drive you just installed is the primary drive, insert a bootable floppy disk into drive A. 10. Turn on the computer. 11. Enter system setup, and update the appropriate Primary Drive option (0 or 1). 12. Exit system setup, and reboot the computer. 13. Partition and logically format your drive before you proceed to the next step. For instructions, see the documentation that came with your operating system. 14. Test the hard drive by running the Dell Diagnostics. 15. If the drive you just installed is the primary drive, install your operating system on the hard drive. For instructions, see the documentation that came with your operating system. After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear