Dell OptiPlex GX260 User Guide - Page 140
Releasing the Insert Tabs - reset at boot
View all Dell OptiPlex GX260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
1 power cable 2 second hard-drive cable (secondary drive) 3 first hard-drive cable (primary boot drive) 14. Close the computer cover. NOTICE: To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer. 15. Connect your computer and devices to their electrical outlets, and turn them on. 16. See the documentation that came with the drive for instructions on installing any software required for drive operation. After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next computer start-up: ALERT! Cover was previously removed. 17. Reset the chassis intrusion detector by changing Chassis Intrusion to Enabled or Enabled-Silent. NOTE: If a setup password has been assigned by someone else, contact your network administrator for information on resetting the chassis intrusion detector. Front-Panel Inserts If you are installing a new floppy or CD/DVD drive rather than replacing a drive, remove the front-panel inserts. 1. Open the cover to a 90-degree angle and release the insert tabs from inside the computer. Releasing the Insert Tabs