Dell PowerConnect B-DCX4S Hardware Reference Guide - Page 124
TABLE 26, Issue, Possible cause, Recommended action
View all Dell PowerConnect B-DCX4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
C Troubleshooting TABLE 26 Issue Troubleshooting the PowerConnect B-DCX-4S (Continued) Possible cause An individual component is not operating as expected. Component may not have power or may not be firmly seated. Pins on the component or the backplane might be damaged. The component might have failed. Recommended action Ensure that the component is receiving power (power LED should be on) and the component is firmly seated. Remove the component from the chassis and inspect the pins on the blade and inside the chassis. Do not reinstall if the pins on either component are damaged, as this could damage pins on other components. Replace parts as required. Enter the tempshow and sensorShow commands to determine the component status. If the component is a CP blade or port blade, enter the slotShow command to determine the status. Replace the component as necessary 110 PowerConnect B-DCX-4S Backbone Hardware Reference Manual 53-1001808-01