Dell PowerConnect B-DCX4S Hardware Reference Guide - Page 90
Disconnecting from the network and fabric, then
View all Dell PowerConnect B-DCX4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
5 RRP: PowerConnect B-DCX-4S chassis • switchShow • fabricShow Copy the command output into a text file named "SANbefor.txt". After the PowerConnect B-DCX-4S is restored to the fabric, this information can be used to verify that no unintentional changes have occurred to the fabric. switch:admin> nsshow Enter Pid COS PortName NodeName TTL switch:admin> nsallshow 12 Nx_Ports in the Fabric switch:admin> switchshow switchName: switch switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name switch:admin> 8. Enter supportShow; then, copy the command output into a text file named "spptshow.txt". NOTE The supportShow command has a very long output and time for completion. It may last 20 minutes or longer depending on the size of the SAN. This file provides a backup of all the information that might be required by Technical Support. The information can be used after the PowerConnect B-DCX-4S is restored to the fabric, to verify that no unintentional changes have occurred to the fabric. switch:admin> supportshow version: 6.2.0 switch:admin> 9. Record the cable connections between the PowerConnect B-DCX-4S and the target device and ports (Table 14). Disconnecting from the network and fabric 1. Shut down the PowerConnect B-DCX-4S using the sysShutdown command. switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]?y HA is disabled Stopping blade 1 Shutting down the blade.... Stopping blade 2 Shutting down the blade.... 76 PowerConnect B-DCX-4S Backbone Hardware Reference Manual 53-1001808-01