Dell PowerConnect B-DCX4S Hardware Reference Guide - Page 56
Table 9
View all Dell PowerConnect B-DCX4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4 Determining the status of a WWN card 1. Enter the chassisShow command to display information about the WWN card. (WWN units correspond to information specific to the WWN card.) Error messages that may indicate problems with a WWN card are summarized in Table 9. TABLE 9 Messages that may indicate WWN card failure Type of message Sample error message WWN unit fails its FRU header access. WWN unit is being faulted. WWN unit is not present or is not accessible. Writing to the FRU history log (hilSetFruHistory) has failed. 0x24c (fabos): Switch: switchname, error EM-I2C_TIMEOUT, 2, WWN 1 I2C timed out: state 0x4 0x24c (fabos): Switch: switchname, Critical EM-WWN_UNKNOWN, 1, Unknown WWN #2 is being faulted 0x24c (fabos): Switch: switchname, Error EM-WWN_ABSENT, 2, WWN #1 not present 0x24c (fabos): Switch: switchname, Error EM-HIL_FAIL, 2, HIL Error: hilSetFruHistory failed, rc=-3 for SLOT 3 Figure 18 displays the WWN bezel (logo plate). FIGURE 18 WWN bezel (logo plate) 42 PowerConnect B-DCX4S Backbone Hardware Reference Manual 53-1001808-01