Dell PowerConnect B-DCX4S Hardware Reference Guide - Page 88

Record the WWN value: Enter, before, Fabric OS Command Reference

Get Dell PowerConnect B-DCX4S PDF manuals and user guides View all Dell PowerConnect B-DCX4S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

5 RRP: PowerConnect B-DCX-4S chassis TABLE 13 Critical information checklist (Continued) Output from supportshow command Location of "spptshow.txt" file Notes regarding supportshow output Information about the new chassis New Factory Serial Num New Serial Num (if available) 1. Open a Telnet session and log in to the PowerConnect B-DCX-4S as admin. The default password is password. Enable the logging function on your Telnet or serial console connection. 2. Back up the current configuration. NOTE If you are using the virtual fabric feature, you should run configupload -vf before running the configupload command in order to save the logical switch configuration. • Enter configUpload -all; then, enter the requested information at the prompts. This command uploads the PowerConnect B-DCX-4S configuration to the customer-defined FTP server, making it available for downloading. For more information about this command, refer to the Fabric OS Command Reference. switch:admin> configupload Protocol (scp or ftp) [ftp]: ftp Server Name or IP Address [host]: 123.123.123.123 User Name [user]: Admin24 File Name [config.txt]: config-switch0.txt Password: xxxxxxxx Upload complete switch:admin> • Alternatively, you can save the configuration file to a Brocade USB. 3. Record the PowerConnect B-DCX-4S values on a workstation (step 4 through step 9). 4. Record the WWN value: Enter wwn; then, copy the command output into a file named "config-miscinfo.txt". switch:admin> wwn 10:00:00:60:69:00:00:0a 5. Record the IP address information. Enter ipAddrShow -sw; then, copy the command output into the "config-miscinfo.txt" file. switch:admin> ipaddrshow SWITCH Ethernet IP Address: 10.32.50.12 Ethernet Subnetmask: 255.55.0.0 Fibre Channel IP Address: 1.2.3.4 Fibre Channel Subnetmask: 255.255.255.0 74 PowerConnect B-DCX-4S Backbone Hardware Reference Manual 53-1001808-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
74
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01
RRP: PowerConnect B-DCX-4S chassis
5
1.
Open a Telnet session and log in to the PowerConnect B-DCX-4S as
admin
. The default
password is
password
. Enable the logging function on your Telnet or serial console connection.
2.
Back up the current configuration.
NOTE
If you are using the virtual fabric feature, you should run
configupload -vf
before
running the
configupload command in order to save the logical switch configuration.
•
Enter
configUpload -all
; then, enter the requested information at the prompts.
This command uploads the PowerConnect B-DCX-4S configuration to the customer-defined FTP
server, making it available for downloading. For more information about this command, refer to
the
Fabric OS Command Reference
.
switch:admin>
configupload
Protocol (scp or ftp) [ftp]:
ftp
Server Name or IP Address [host]:
123.123.123.123
User Name [user]:
Admin24
File Name [config.txt]:
config-switch0.txt
Password:
xxxxxxxx
Upload complete
switch:admin>
•
Alternatively, you can save the configuration file to a Brocade USB.
3.
Record the PowerConnect B-DCX-4S values on a workstation (
step 4
through
step 9
).
4.
Record the WWN value: Enter
wwn
; then, copy the command output into a file named
“config-miscinfo.txt”.
switch:admin>
wwn
10:00:00:60:69:00:00:0a
5.
Record the IP address information.
Enter
ipAddrShow -sw
; then, copy the command output into the “config-miscinfo.txt” file.
switch:admin>
ipaddrshow
SWITCH
Ethernet IP Address: 10.32.50.12
Ethernet Subnetmask: 255.55.0.0
Fibre Channel IP Address: 1.2.3.4
Fibre Channel Subnetmask: 255.255.255.0
Output from supportshow command
Location of “spptshow.txt” file
Notes regarding
supportshow
output
Information about the new chassis
New Factory Serial Num
New Serial Num (if available)
TABLE 13
Critical information checklist (Continued)