Dell PowerConnect B-DCX4S Hardware Reference Guide - Page 57
Removal and Replacement Procedures (RRPs), In this Introduction, RRP: Chassis door
View all Dell PowerConnect B-DCX4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter Removal and Replacement Procedures (RRPs) 5 In this chapter •Introduction 43 •RRP: Chassis door 43 •RRP: Vertical cable management fingers 44 •RRP: Port, application, and encryption blades 46 •RRP: Blade filler panel 49 •RRP: Control processor blade (CP8 50 •RRP: Core switch blade (CR4S-8 56 •RRP: Power supply 59 •RRP: Blower assembly 60 •RRP: WWN card 62 •RRP: SFPs and XFPs 65 •RRP: Inter-chassis link (ICL) cables 66 •RRP: PowerConnect B-DCX-4S chassis 72 Introduction NOTE Read the safety notices before servicing ("Safety notices"). The field replaceable units (FRUs) in the PowerConnect B-DCX-4S can be removed and replaced without special tools. The PowerConnect B-DCX-4S can continue operating during many of the FRU replacements if the conditions specified in the procedure are followed. The following sections contain FRU removal and replacement procedures (RRPs). RRP: Chassis door NOTE The chassis door must be installed to ensure the PowerConnect B-DCX-4S meets EMI and other regulatory certifications. Additionally, if ICL cables are not used, EMI plugs must be inserted in the ICL cable ports to meet certification standards. PowerConnect B-DCX-4S Backbone Hardware Reference Manual 43 53-1001808-01