Dell PowerEdge 1950 Hardware Owner's Manual (PDF) - Page 47
Closing the System
View all Dell PowerEdge 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4 Lift up on the latch on top of the system to guide it back and into an offset position. See Figure 3-3. 5 Grasp the cover on both sides and carefully lift the cover away from the system. Figure 3-3. Removing the Cover 1 2 3 4 1 latch 4 chassis tabs 2 latch release lock 3 alignment J hooks Closing the System 1 Lift up the latch on the cover. 2 Place the cover on top of the system and offset the cover slightly back so that it clears the chassis J hooks and lays flat on the system chassis. See Figure 3-3. 3 Lower the cover into the closed position aligning it with the J hooks and push down on the latch to guide the cover into place. 4 Rotate the latch release lock in a clockwise direction to secure the cover. Installing System Components 47
Installing System Components
47
4
Lift up on the latch on top of the system to guide it back and into an offset position. See Figure 3-3.
5
Grasp the cover on both sides and carefully lift the cover away from the system.
Figure 3-3.
Removing the Cover
Closing the System
1
Lift up the latch on the cover.
2
Place the cover on top of the system and offset the cover slightly back so that it clears the chassis J hooks
and lays flat on the system chassis. See Figure 3-3.
3
Lower the cover into the closed position aligning it with the J hooks and push down on the latch to guide
the cover into place.
4
Rotate the latch release lock in a clockwise direction to secure the cover.
1
latch
2
latch release lock
3
alignment J hooks
4
chassis tabs
3
2
4
1