Dell PowerEdge 1950 Hardware Owner's Manual (PDF) - Page 74
Installing the Optical Drive Tray - raid
View all Dell PowerEdge 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Figure 3-17. Removing and Installing the Optical Drive Tray 1 2 3 4 1 optical -drive tray 4 optical drive 2 optical-drive cable 3 optical-drive release tab Installing the Optical Drive Tray 1 Align the optical drive tray with its opening in the front panel. The optical drive opening is located directly below the SAS daughter card bay. 2 Slide in the drive tray until the tray snaps into place. See Figure 3-17. 3 Connect the optical-drive cable from the back of the drive. See Figure 3-17. 4 Replace the SAS controller daughter card.See "Installing a SAS Controller Daughter Card or SAS RAID Controller Daughter Card" on page 56. 5 Close the system. See "Opening and Closing the System" on page 46. 6 Replace the bezel. See "Removing and Replacing the Front Bezel" on page 45. 7 Reconnect your system and peripherals to their electrical outlets, and turn on the system. 74 Installing System Components