Dell PowerEdge 1950 Hardware Owner's Manual (PDF) - Page 49
Replacing a Cooling Fan Module, Attach the fan module connectors.
View all Dell PowerEdge 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Figure 3-4. Removing and Installing a Cooling Fan 2 1 3 4 5 1 cooling fan modules (4) 2 fan module handles 3 module wire harness 4 cooling fan module connector 5 system board cooling shroud Replacing a Cooling Fan Module NOTE: The procedure for installing each individual fan is the same. 1 Ensure that the fan handle is upright and lower the fan into its retention base until the fan is fully seated. Then lower the fan handle until it snaps into place. See Figure 3-4. 2 Attach the fan module connectors. 3 If you removed the memory cooling shroud to access the fan modules, replace the shroud. See "Replacing the Memory Cooling Shroud" on page 53. 4 Close the system. See "Opening and Closing the System" on page 46. Installing System Components 49