Dell PowerEdge 1950 Hardware Owner's Manual (PDF) - Page 79
Dell PowerEdge 1950 Manual
View all Dell PowerEdge 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 3-19. Installing a SAS Hard Drive Into a Drive Carrier 1 2 3 1 screws (4) 2 SATAu drive carrier 3 SAS hard drive Installing a SATA Hard Drive Into a SATA Drive Carrier NOTE: SATA hard drives that connect directly to the SAS backplane must be installed in SATA drive carriers (labeled "SATA"). Only SATA hard drives with interposer cards can be installed in SATAu drive carriers. 1 Insert the SATA hard drive into the hard-drive carrier with the connector end of the drive at the rear. See Figure 3-20. 2 Align the screw holes on the hard drive with the holes on the hard-drive carrier. See Figure 3-20. 3 Attach the four screws to secure the hard drive to the hard-drive carrier. See Figure 3-20. Installing System Components 79
Installing System Components
79
Figure 3-19.
Installing a SAS Hard Drive Into a Drive Carrier
Installing a SATA Hard Drive Into a SATA Drive Carrier
NOTE:
SATA hard drives that connect directly to the SAS backplane must be installed in SATA drive carriers
(labeled "SATA"). Only SATA hard drives with interposer cards can be installed in SATAu drive carriers.
1
Insert the SATA hard drive into the hard-drive carrier with the connector end of the drive at the rear.
See
Figure 3-20
.
2
Align the screw holes on the hard drive with the holes on the hard-drive carrier. See
Figure 3-20
.
3
Attach the four screws to secure the hard drive to the hard-drive carrier. See
Figure 3-20
.
1
screws (4)
2
SATAu drive carrier
3
SAS hard drive
1
3
2