Dell PowerEdge 1950 Hardware Owner's Manual (PDF) - Page 81
Installing a SATA Hard Drive and Interposer Card Into a SATAu Drive Carrier
View all Dell PowerEdge 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4 Attach the interposer card to the rear of the SATA hard drive: a Angle the top of the interposer card into the inside top carrier rail so that the tabs on the interposer card bracket attach to the slots on the inside of the carrier rail. See Figure 3-21. b Rotate the bottom end of the card toward the hard drive to seat the connector. See Figure 3-21. c Push the bottom end of the card towards the hard drive until the latch on the card bracket clicks into place. Figure 3-21. Installing a SATA Hard Drive and Interposer Card Into a SATAu Drive Carrier 1 2 3 4 1 screws (4) 4 SATA hard-drive 5 2 SATAu drive carrier 5 hole labels 3 interposer card (SATA only) Installing System Components 81
Installing System Components
81
4
Attach the interposer card to the rear of the SATA hard drive:
a
Angle the top of the interposer card into the inside top carrier rail so that the tabs on the interposer
card bracket attach to the slots on the inside of the carrier rail.
See
Figure 3-21.
b
Rotate the bottom end of the card toward the hard drive to seat the connector.
See
Figure 3-21.
c
Push the bottom end of the card towards the hard drive until the latch on the card bracket clicks into
place.
Figure 3-21.
Installing a SATA Hard Drive and Interposer Card Into a SATAu Drive Carrier
1
screws (4)
2
SATAu drive carrier
3
interposer card (SATA only)
4
SATA hard-drive
5
hole labels
1
4
5
3
2