Epson Stylus COLOR 850N User Manual - Page 127
Installing EPSON Net! for DOS
View all Epson Stylus COLOR 850N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Using the Ethernet Card 3. From the Installation Options screen, select Product Options and press Enter. 4. From the Other Installation Items/Products list, select Configure Network Protocols and press Enter. 5. From the Internetworking Configuration list, select Protocols and press Enter. 6. From the Protocol Configuration list, select IPX and press Enter. 7. In the IPX Protocol Configuration dialog box, make sure the Routing Protocol is set to RIP/SAP Only. If it is not, select NLSP with RIP/SAP Compatibility and press Enter, then select RIP/SAP Only and press Enter. Note: This utility requires a minimum of 480 KB of conventional memory. See Appendix A if you need to create diskettes and use them to install EPSON Net!. Installing EPSON Net! for DOS If you have Novell NetWare, you can install EPSON Net! on your DOS computer. Insert the EPSON Stylus COLOR 850N CD-ROM in your drive and use the DOS COPY command (COPY D:\FILENAME.*) to copy the following files to a network directory or to your hard drive: D:\EPSONNET\DOS\EPNWDE.EXE D:\EPSONNET\DOS\EPNWDE.DAT See your Setup Guide to use EPSON Net! to configure the printer's Ethernet card. 6-25