HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 130
Disable an HP Jetdirect embedded print server (V.38.xx), Select, Ready, Attention
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Disable an HP Jetdirect embedded print server (V.38.xx) NOTE: You can disable HP Jetdirect EIO and external print servers by disconnecting them from the printer/MFP. You can disable an HP Jetdirect embedded print server by using the printer/MFP Service menu. This can help you isolate faults to either the printer or the print server. To disable the print serer, use the following steps: 1. Turn the printer on and watch for the memory count to begin. 2. Press and hold the Select button (or the 6 button on MFPs with numeric keypads) until the three control panel lights (Ready, Data, Attention) blink and then remain on. 3. Release the Select button (or 6 button). The control panel displays Select. 4. Press the down arrow M button (or 9 button) until Embedded LAN disable appears. 5. Press the Select button (or 6 button) to disable the embedded print server and then continue its turn-on sequence. 6. Verify whether the printer/MFP properly completes its turn-on sequence. To enable the embedded print server, use the same instructions except select Embedded LAN enable in step 4. 120 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW