HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 183
Table C-1, Menu item, Sub-menu item, Values and Description, CAUTION
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued) Menu item Sub-menu item Sub-menu item Values and Description Security Print Sec Page Yes: Print the current IPsec security settings. No (default): Do not print the current settings.. NOTE: Displays only if IPsec is supported on the print server. Secure Web Require encrypted communication between a browser and the HP Jetdirect embedded Web server. HTTPS Required: Only HTTPS access is accepted. The print server appears as a secure site. HTTP/HTTPS Optional: Access using either HTTP or HTTPS. NOTE: The factory default setting depends on the print server model. IPsec or Firewall Specify the IPsec or Firewall status on the print server. Keep: Retain IPsec/Firewall configuration. Disable: Disable IPsec/Firewall operation on the print server. NOTE: Displays IPsec if the print server supports both IPsec and Firewall. Displays Firewall if the print server does not support IPsec.. Reset Security Reset security settings on the print server to factory defaults. No (default): Retain current security settings. Yes: Reset security settings to factory defaults. 802.1X Reset 802.1X settings on the print server to factory defaults. No (default): Retain current 802.1X settings. Yes: Reset 802.1X settings to factory defaults. Diagnostics Embedded Tests (HP Jetdirect embedded print servers only.) Diagnose network hardware or TCP/IP network connection problems. Use an embedded test to check hardware and communication paths on the print server. After you select and enable a test and set the execution time, select Execute to initiate the test. Depending on the execution time, a selected test runs continuously until either the device is turned off, or an error occurs and a diagnostic page is printed. LAN HW Test CAUTION: Running this embedded test erases your TCP/IP configuration. Performs an internal loopback test, which sends and receives packets only on the internal network hardware. There are no external transmissions. Yes: Select this test. ENWW Graphical control panel menus 173