HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 182
Appendix C, HP Jetdirect control panel menus V.38.xx
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued) Menu item Sub-menu item Sub-menu item Values and Description Router Unavailable: If a router is not available, the print server obtains its stateful configuration from a DHCPv6 server. Always: Print server always attempts to obtain its stateful configuration from a DHCPv6 server. Primary DNS IPv6 address of the primary DNS server the print server uses. NOTE: Displays only if Manual configuration is a higher priority than DHCP in the Config Precedence table, when configured using the embedded Web server. Secondary DNS IPv6 address for a secondary DNS server that the print server uses. NOTE: Displays only if Manual configuration is a higher priority than DHCP in the Config Precedence table, when configured using the embedded Web server. Proxy Server Proxy server to use by embedded applications in the device. A proxy server is typically used by network clients for Internet access. The proxy server caches Web pages and provides a degree of Internet security. Enter its IPv4 address or FQDN (up to 255 octets). Contact your ISP for the proxy server address, when required. Proxy Port Port number used by the proxy server for client support. This port is reserved for proxy activity on your network, and can be a value from 0 to 65535. IPX/SPX Enable Off: Disable the IPX/SPX protocol. On: Enable the IPX/SPX protocol. NOTE: The factory default setting depends on the print server model. Frame Type Frame-type setting for your network. Auto: Sense all types and configure the first one detected. EN_8023, EN_II, EN_8022, and EN_SNAP: Frametype selections for Ethernet networks AppleTalk Enable Off: Disable the AppleTalk protocol. On: Enable the AppleTalk protocol. NOTE: The factory default setting depends on the print server model. DLC/LLC Enable Off: Disable the DLC/LLC protocol. On: Enable the DLC/LLC protocol. NOTE: The factory default setting depends on the print server model. 172 Appendix C HP Jetdirect control panel menus (V.38.xx) ENWW