HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 37
TFTP configuration file parameters continued, Table 3-2
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Table 3-2 TFTP configuration file parameters (continued) security-reset: Reset security settings on the print server to factory default values. 0 (default): Do not reset. 1: Reset. TCP/IP Main llmnr: ● Link local multicast name resolution (LLMNR). 0 (default): Disable. 1: Enable. host-name: (or sys-name:, name:) Node name that appears on the HP Jetdirect configuration page. Default is NPIxxxxxx, where xxxxxx represents the last six digits of the LAN hardware address. parm-file: Path and file name whose contents are printed each time the print server is turned on. Enter up to 64 alphanumeric characters. domain-name: Domain name of the device, for example support.hp.com. Does not include the host name and is not the FQDN, such as printer1.support.hp.com. pri-dns-svr: (or dns-srv:) IP address of the DNS server. sec-dns-svr: IP address of a secondary DNS server to use if the primary DNS server is unavailable. pri-wins-svr: (or pri-wins-srv:) IP address of the primary Windows Internet naming service (WINS) server. sec-wins-svr: (or sec-wins-srv:) IP address of the secondary WINS) server. TCP/IP Print Options 9100-printing: (or 9100-config:) Print to TCP port 9100 on the print server. 0: Disable. 1 (default): Enable. ftp-printing: (or ftp-config:, ftp:) Print through FTP. 0: Disable. 1 (default): Enable. ipp-printing: (or ipp-config:, ipp:) Print through IPP. 0: Disable. 1 (default): Enable. lpd-printing: (or lpd-config:, lpd:) Print using the line printer daemon (LPD) on the HP Jetdirect print server. 0: Disable. 1 (default): Enable. banner: Print a port-specific LPD banner page. 0: Disable. 1 (default): Enable. ENWW IPv4 configuration 27