HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 56
TCP/IP LPD Queues, Print using LPD TCP port 515.
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Table 3-3 Telnet Commands and Parameters (continued) 0: Disable. 1 (default): Enable. ftp-printing Print through FTP (TCP ports 20, 21). 0 Disable. 1 (default): Enable. ipp-printing print using IPP (TCP port 631). 0 Disable. 1 (default): Enable. lpd-printing Print using LPD (TCP port 515). 0 Disable. 1 (default): Enable. banner Print an LPD banner page. 0 Disable. 1 (default) Enable. ipp-job-acct Use job accounting for IPP printing. 0 Disable. 1 (default): Enable. interlock Require an acknowledgement (ACK) on all TCP packets before the printer can close a port 9100 print connection. Specify a port number and parameter value. For HP Jetdirect embedded print servers, the default port number is 1. In the following example, the port is 1 and interlock is enabled: interlock 1 1 0 (default): Disable interlock. 1: Enable. mult-tcp-conn Allow multiple TCP connections (restrict the use of multiple ports). 0 (default): Enable multiple connections. 1: Disable multiple connections (allow only one connection). buffer-packing Pack the data buffer on TCP/IP packets before sending. 0 (default): Enable. Pack the data buffer before sending to the printer. 1: Disable. Data is sent to the printer as it is received. write-mode Set the TCP PSH flag for device-to-client data transfers. 0 (default): Disable. 1: Enable the all-push option, which sets the push bit in all data packets. TCP/IP LPD Queues 46 Chapter 3 TCP/IP configuration ENWW