HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 187
Classic control panel EIO menus, HP Jetdirect EIO Menu on Classic Control Panel
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Classic control panel EIO menus Classic control panels are provided on older devices that support HP Jetdirect EIO print servers only. Classic control panels typically display two lines of 16 characters each. Use the available device keys to display and select HP Jetdirect settings. Typically, an asterisk (*) identifies the selected value. Figure C-2 Example of Classic Control Panel Table C-2 HP Jetdirect EIO Menu on Classic Control Panel Menu Item Description CFG NETWORK Access the HP Jetdirect menu. You must set this to YES* each time you want to access the menu. NO (default): Bypass the HP Jetdirect menu. YES: Access the HP Jetdirect menu. TCP/IP Enable the selected protocol stack. IPX/SPX ON: Enable the protocol. DLC/LLC OFF: Disable the protocol. ATALK NOTE: The factory default setting depends on the print server model. On HP Jetdirect 635n print servers, all network protocols except TCP/IP are disabled by default.. CFG TCP/IP Access the TCP/IP menu and set TCP/IP protocol parameters. NO (default): Bypass the TCP/IP menu. YES: Access the TCP/IP menu. ● BOOTP=YES* Enable IPv4 configuration by a BootP Server. ● DHCP=YES* Enable IPv4 configuration by a DHCP Server. If DHCP=YES* and the print server has a DHCP lease, you can configure the following DHCP settings: ◦ RELEASE: Select whether to release (YES) or save (NO) the current lease. ◦ RENEW: Select whether to renew (YES or NO) the lease. ● AUTO IP=YES* Automatically assign a link-local IPv4 address in the form 169.254.x.x. ENWW Classic control panel EIO menus 177