HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 58

LAN hardware MAC address. Enter up to 64 alphanumeric characters.

Get HP 630n - JetDirect Gigabit EN Print Server PDF manuals and user guides
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Table 3-3 Telnet Commands and Parameters (continued) Set to 8 to disable all syslog messages. 0: Disable. 7 (default): Enable. Messages of all priorities are sent. syslog-facility Identify the source facility of a message. Typically used to identify the source of selected messages during troubleshooting. By default, the HP Jetdirect print server uses LPR as the source facility code. Use values of local0 through local7 to isolate individual or groups of print servers. slp-config Use the SLP operation on the print server. SLP is used by selected HP software applications (through UDP port 427) to automate device discovery. 0: Disable. 1 (default): Enable. If SLP uses multicast protocols, you must enable multicast IPv4. slp-keep-alive bonjour-config Time (in minutes) the print server waits to send multicast packets on the network to prevent deletion from network device tables. Some infrastructure devices, such as switches, delete devices from their device tables due to inactivity on the network. 0: Disable. 1 to 1440: Enable. Use Bonjour. (Previously listed as multicast domain name system [mDNS services].) Bonjour is typically used for IP address and name resolution, through UDP port 5353, where a conventional DNS server is not available. 0: Disable. 1 (default): Enable. To use Bonjour operation, you must enable multicast IPv4 (ipv4-multicast). bonjour-svc-name Bonjour Domain Name bonjour-pri-svc Bonjour service name. This name is persistent and is used to resolve a particular device or service if socket information (such as the IP address) changes from session to session. Apple Bonjour displays this service. The default service name is the printer model and the LAN hardware (MAC) address. Enter up to 64 alphanumeric characters. (Read only.) Bonjour domain name assigned to the device, in the form .local. If a user-specified host name is not assigned, the default host name NPIxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. Highest priority Bonjour service to use for printing. Set this parameter using the following values: 1: Port 9100 printing 2: IPP port printing 3: Default LPD raw queue 4: Default LPD text queue 5: Default LPD auto queue 6: Default LPD binps (binary PostScript) queue 48 Chapter 3 TCP/IP configuration ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
Set to 8 to disable all syslog messages.
0: Disable.
7 (default): Enable. Messages of all priorities are sent.
syslog-facility
Identify the source facility of a message. Typically used to identify the source of selected
messages during troubleshooting. By default, the HP Jetdirect print server uses
LPR
as
the source facility code. Use values of
local0
through
local7
to isolate individual or
groups of print servers.
slp-config
Use the SLP operation on the print server. SLP is used by selected HP software
applications (through UDP port 427) to automate device discovery.
0
: Disable.
1
(default): Enable.
If SLP uses multicast protocols, you must enable multicast IPv4.
slp-keep-alive
Time (in minutes) the print server waits to send multicast packets on the network to prevent
deletion from network device tables. Some infrastructure devices, such as switches, delete
devices from their device tables due to inactivity on the network.
0: Disable.
1 to 1440: Enable.
bonjour-config
Use Bonjour. (Previously listed as multicast domain name system [mDNS services].)
Bonjour is typically used for IP address and name resolution, through UDP port 5353,
where a conventional DNS server is not available.
0
: Disable.
1
(default): Enable.
To use Bonjour operation, you must enable multicast IPv4 (
ipv4–multicast
).
bonjour-svc-name
Bonjour service name. This name is persistent and is used to resolve a particular device
or service if socket information (such as the IP address) changes from session to session.
Apple Bonjour displays this service. The default service name is the printer model and the
LAN hardware (MAC) address. Enter up to 64 alphanumeric characters.
Bonjour Domain Name
(Read only.) Bonjour domain name assigned to the device, in the form <host name>.local.
If a user-specified host name is not assigned, the default host name NPIxxxxxx is used,
where xxxxxx are the last 6 digits of the LAN hardware (MAC) address.
bonjour-pri-svc
Highest priority Bonjour service to use for printing. Set this parameter using the following
values:
1
: Port 9100 printing
2
: IPP port printing
3
: Default LPD raw queue
4
: Default LPD text queue
5
: Default LPD auto queue
6
: Default LPD binps (binary PostScript) queue
Table 3-3
Telnet Commands and Parameters (continued)
48
Chapter 3
TCP/IP configuration
ENWW