HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 181
HP Jetdirect EIO Menu on Graphical Control Panel continued, Table C-1
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued) Menu item Sub-menu item Sub-menu item Values and Description Yes: Print server requests to renew the current DHCP lease. Manual Settings Available if Config Method is set to Manual. You can set the following from the printer control panel: IP Address: Printer IP address. Subnet Mask: Printer subnet mask. Syslog Server: IP address of the syslog server used to receive and log syslog messages. Default Gateway: IP address of the gateway or router used for communications with other networks. Idle Timeout: Time, in seconds, after which an idle TCP print data connection is closed. Default IP Default IP address to use if the print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration. (For example, when manually configured to use BootP or DHCP.) Auto IP: Link-local IP address 169.254.x.x is set. Legacy: 192.0.0.192 is set, consistent with older HP Jetdirect devices. Primary DNS IP address (n.n.n.n) of a primary DNS server. NOTE: Displays only if Manual configuration is a higher priority than DHCP in the Config Precedence table, when configured through the embedded Web server. Secondary DNS IP address (n.n.n.n) of a secondary DNS server. NOTE: Displays only if Manual configuration is a higher priority than DHCP in the Config Precedence table, when configured through the embedded Web server. IPv6 Settings Enable IPv6 operation on the print server. Off: Disable IPv6. On (default): Enable IPv6. Address Manually configure an IPv6 address. Manual Settings: Manually configure a TCP/ IPv6 address. Enable: Enable (On) or disable (Off) manual configuration. Address: IPv6 node address (32 hexadecimal digits). DHCPv6 Policy Router Specified: Router determines the stateful autoconfiguration method used by the print server. The print server obtains its address, its configuration information, or both from a DHCPv6 server. ENWW Graphical control panel menus 171