HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 154

Table 8-14, Error messages continued

Get HP 630n - JetDirect Gigabit EN Print Server PDF manuals and user guides
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 154 highlights

Table 8-14 Error messages (continued) Error Code and Message Description The print server continues to scan for the specified SSID. 09 LAN ERROR - BABBLE Check the network connections. If the connections are intact, run the self-test by turning the printer off, and then on again. If the error persists, replace the print server. 0A LAN ERROR - NO SQE (Ethernet) Check the network connections. If the connections are intact, run the selftest by turning the print server off, and then on again. If the error persists, replace the print server. 0C LAN ERROR - RECEIVER OFF Check the cabling and connectors on your Ethernet network. If you cannot find a problem with your network cabling, run the self-test by turning the printer off, and then on again. If the error persists, there might be a problem with the HP Jetdirect print server. 0D LAN ERROR - TRANSMITTER OFF Check the cabling and connectors on your Ethernet network. If you cannot find a problem with your network cabling, run the self-test by turning the printer off, and then on again. If the error persists, there might be a problem with the HP Jetdirect print server. 0E LAN ERROR - LOSS OF CARRIER Check the network connections. If the connections are intact, run the self-test: turn the printer off, and then on again. If the error persists, replace the HP Jetdirect print server. 10 LAN ERROR - UNDERFLOW (Ethernet) Check the cabling and connectors on your network. If you cannot find a problem with your network cabling, run the self-test by turning the printer off, and then on again. If the error persists, there might be a problem with the HP Jetdirect print server. 11 LAN ERROR - RETRY FAULTS (Ethernet) There is a problem with your network cabling or external network configuration. Verify operation of the hub or switch port. 12 LAN ERROR - NO LINKBEAT Using a wired Ethernet port, this message is displayed if a link beat is not sensed. Check the network cable, and verify that the concentrator/hub is providing a link beat. 13 NETWORK RECONFIG - MUST Reset or turn the print server off and then on to enable new configuration values. REBOOT 14 DISCONNECTED Novell NetWare protocol is disconnected. Check the server and the print server. 15 CONFIGURATION ERROR (Ethernet) Configuration information for the NetWare functions is not stored correctly on the print server. Use the installation software, embedded Web server, or other tools to reconfigure the print server. If this error persists, there might be a problem with the HP Jetdirect print server. 16 NOT CONFIGURED (Ethernet) Print server is not configured for NetWare. Use the installation software, embedded Web server, or other tools to configure the print server for NetWare networks. 17 UNABLE TO FIND SERVER (Ethernet) HP Jetdirect print server is unable to find the NetWare print server (Remote Printer mode) or file server (Queue Server mode). (There was no response to service queries for advertising print servers or file servers that matched the configured print server or file server name.) Verify that the print or file server is running and that the name configured on the HP Jetdirect print server matches the actual name used by the print or file server. Verify that all cables and routers are functioning correctly. 18 PASSWORD ERROR Print server detected that the password for the NetWare print server object is incorrect. Use a NetWare utility (such as PCONSOLE) to erase the print server object password. A new password is set when the HP Jetdirect print server logs on again. NOTE: When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers are connected. 19 NO QUEUE ASSIGNED The HP Jetdirect print server object is not assigned any queues to service. Assign queues to the print server object using printer installation or NetWare utilities. NOTE: When multiple file servers are configured, the error is displayed on the configuration page only if none of the file servers are successfully connected. 144 Chapter 8 HP Jetdirect configuration pages ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
Error Code and Message
Description
The print server continues to scan for the specified SSID.
09 LAN ERROR - BABBLE
Check the network connections. If the connections are intact, run the self-test by turning
the printer off, and then on again. If the error persists, replace the print server.
0A LAN ERROR - NO SQE
(Ethernet) Check the network connections. If the connections are intact, run the self-
test by turning the print server off, and then on again. If the error persists, replace the
print server.
0C LAN ERROR - RECEIVER OFF
Check the cabling and connectors on your Ethernet network. If you cannot find a
problem with your network cabling, run the self-test by turning the printer off, and then
on again. If the error persists, there might be a problem with the HP Jetdirect print server.
0D LAN ERROR - TRANSMITTER
OFF
Check the cabling and connectors on your Ethernet network. If you cannot find a
problem with your network cabling, run the self-test by turning the printer off, and then
on again. If the error persists, there might be a problem with the HP Jetdirect print server.
0E LAN ERROR - LOSS OF
CARRIER
Check the network connections. If the connections are intact, run the self-test: turn the
printer off, and then on again. If the error persists, replace the HP Jetdirect print server.
10 LAN ERROR - UNDERFLOW
(Ethernet) Check the cabling and connectors on your network. If you cannot find a
problem with your network cabling, run the self-test by turning the printer off, and then
on again. If the error persists, there might be a problem with the HP Jetdirect print server.
11 LAN ERROR - RETRY FAULTS
(Ethernet) There is a problem with your network cabling or external network
configuration. Verify operation of the hub or switch port.
12 LAN ERROR - NO LINKBEAT
Using a wired Ethernet port, this message is displayed if a link beat is not sensed. Check
the network cable, and verify that the concentrator/hub is providing a link beat.
13 NETWORK RECONFIG - MUST
REBOOT
Reset or turn the print server off and then on to enable new configuration values.
14 DISCONNECTED
Novell NetWare protocol is disconnected. Check the server and the print server.
15 CONFIGURATION ERROR
(Ethernet) Configuration information for the NetWare functions is not stored correctly
on the print server. Use the installation software, embedded Web server, or other tools
to reconfigure the print server. If this error persists, there might be a problem with the
HP Jetdirect print server.
16 NOT CONFIGURED
(Ethernet) Print server is not configured for NetWare. Use the installation software,
embedded Web server, or other tools to configure the print server for NetWare networks.
17 UNABLE TO FIND SERVER
(Ethernet) HP Jetdirect print server is unable to find the NetWare print server (Remote
Printer mode) or file server (Queue Server mode). (There was no response to service
queries for advertising print servers or file servers that matched the configured print
server or file server name.)
Verify that the print or file server is running and that the name configured on the
HP Jetdirect print server matches the actual name used by the print or file server. Verify
that all cables and routers are functioning correctly.
18 PASSWORD ERROR
Print server detected that the password for the NetWare print server object is incorrect.
Use a NetWare utility (such as PCONSOLE) to erase the print server object password.
A new password is set when the HP Jetdirect print server logs on again.
NOTE:
When multiple file servers are configured, the error is only displayed on the
configuration page if none of the file servers are connected.
19 NO QUEUE ASSIGNED
The HP Jetdirect print server object is not assigned any queues to service. Assign
queues to the print server object using printer installation or NetWare utilities.
NOTE:
When multiple file servers are configured, the error is displayed on the
configuration page only if none of the file servers are successfully connected.
Table 8-14
Error messages (continued)
144
Chapter 8
HP Jetdirect configuration pages
ENWW