HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 89
Other Settings, Misc. Settings
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Other Settings Use this tab to provide access to a variety of management and printing configuration options. The following tabs are discussed: ● Misc. Settings on page 79 Enable miscellaneous advanced protocols and functions ● Firmware Upgrade on page 81 Update your HP Jetdirect print server with new features and enhancements ● LPD Queues on page 81 Set up print queues used in printing with line printer daemon (LPD) printing services ● USB Settings on page 83 (External print servers only.) Configure USB connection parameters ● Support Info on page 84 Set up the Support link located under Other Links in the left margin ● Refresh Rate on page 84 Set the time interval (in seconds) for embedded Web server diagnostic page updates Misc. Settings Use the Misc. Settings tab to set a variety of advanced protocols and features, as described in Table 4-13 Miscellaneous Settings on page 79. Table 4-13 Miscellaneous Settings Item Description SLP Config Enable SLP, which is used by certain client application software to automatically discover and identify the HP Jetdirect print server. If SLP uses multicast protocols, you must enable Multicast IPv4. Telnet Config Use Telnet to access to HP Jetdirect configuration parameters. For more information, see TCP/IP configuration on page 15. Bonjour Use Bonjour services (formerly listed as Multicast Domain Name System [mDNS] services). Bonjour is typically used for IP address and name resolution (through UDP port 5353) where a conventional DNS server is not used. For Bonjour operation, you must enable Multicast IPv4. Multicast IPv4 Use the receipt and transmission of IP version 4 multicast packets by the print server. NOTE: If disabled, other protocols that use multicast protocols, such as Bonjour and SLP, might also be disabled. 9100 Config Use port 9100 services. This is an HP-proprietary raw TCP/IP port on the HP Jetdirect print server and is the default port for printing. It is accessed by HP software, such as the HP Standard Port. FTP Printing Use FTP services available on the HP Jetdirect print server for printing. For more information, see FTP printing on page 165. LPD Printing Use LPD services on the HP Jetdirect print server. LPD provides line printer spooling services for TCP/IP systems. For more information, see LPD printing on page 155. IPP Printing Use IPP on the HP Jetdirect print server. If the printer is properly connected and accessible, IPP allows printing to this device over the Internet (or intranet). A properly configured IPP client system is also required. For information on IPP client software, see HP software solutions summary on page 7. ENWW Networking tab 79