HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 147
Network Statistics, TCP/IP protocol information, Table, Network, Statistics,
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Table 8-5 Security Settings (continued) Message Description Access List (IPv4 only) Access control list is set on the HP Jetdirect print server. The list specifies the IP address of individual systems, or IP network of systems, that are allowed access to the print server and device. Specified Host access list is set. Secure Web Not Specified Host access list is not set. All systems are allowed access. Use encrypted communications between a browser and the HP Jetdirect embedded Web server. Optional (HTTPS/HTTP) Allows un-encrypted communication using standard HTTP ports, as well as encrypted communications using HTTPS. HTTPS Required Allow only encrypted communications on HTTPS. Network Statistics Information in this section of the HP Jetdirect configuration page is described in Table 8-6 Network Statistics on page 137. Table 8-6 Network Statistics Message Description TOTAL PACKETS RECEIVED Total number of frames (packets) received by the HP Jetdirect print server without error. Includes broadcast, multicast packets, and packets specifically addressed to the print server. Does not include packets specifically addressed to other nodes. UNICAST PACKETS RECEIVED Number of frames specifically addressed to this HP Jetdirect print server. Does not include broadcasts or multicasts. BAD PACKETS RECEIVED Total number of frames (packets) received with errors by the HP Jetdirect print server. TOTAL PACKETS TRANSMITTED Total number of frames (packets) transmitted without error. TCP/IP protocol information Information in this section of the HP Jetdirect configuration page is described in the following table. For general TCP/IP configuration parameters, see Table 8-7 TCP/IP configuration information on page 137. For IPv4 parameters, see Table 8-8 IPv4 Section on page 138. For IPv6 parameters, see Table 8-9 IPv6 Section on page 140. For error messages, see Table 8-14 Error messages on page 143. Table 8-7 TCP/IP configuration information Message Description IPv4 Status of IPv4 and IPv6 protocols on the print server: and Enabled Protocol is active. IPv6 Disabled Protocol is inactive. HOST NAME Host name configured on the print server. It might be truncated. Not Specified Host name not specified in a BOOTP response or TFTP configuration file. ENWW HP Jetdirect configuration page 137