HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 35
TFTP configuration file entries IPv4, path name is specified in the BOOTP reply using
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 3-1 Tags supported in a BOOTP/DHCP boot file (continued) Item RFC 2132 Option Description T147 -- Write mode. HP proprietary. Set the TCP PSH flag for device-to-client data transfers. 0 (default): Disable. 1: Set the TCP PSH (all-push) in all data packets. T148 -- IP gateway disable. HP proprietary. Control configuration of a Gateway IP address. 0 (default): Allow configuration of an IP address. 1: Prevent configuration. T149 -- Interlock mode. HP proprietary. Require an acknowledgement (ACK) on all TCP packets before allowing the printer to close a port 9100 print connection. Specify a port number and option, as in the following example: : For supported HP Jetdirect print servers, the default port number is 1. : Set to 0 (default) to disable interlock, or 1 to enable. For example, setting this to "1 1" specifies port number 1 and enables interlock. T150 -- TFTP server's IP address. HP proprietary. Specify the IP address of the TFTP server where the TFTP configuration file is located. T151 -- Network configuration. HP proprietary. Send either BOOTP-ONLY or DHCP-ONLY requests. TFTP configuration file entries (IPv4) To provide additional configuration parameters for your HP Jetdirect print server, such as SNMP or nondefault settings, you can download a configuration file using TFTP. This TFTP configuration file's relative path name is specified in the BOOTP reply using the /etc/bootptab file's T144 vendor-specific tag, or the ef standard BOOTP tag entry. The following is an example of a TFTP configuration file. (The # symbol signifies a remark and is not included in the file.) ENWW IPv4 configuration 25