HP 630n HP Jetdirect Print Servers - Administrator's Guide - Page 55

TCP/IP Print Options, TFTP Filename

Get HP 630n - JetDirect Gigabit EN Print Server PDF manuals and user guides
UPC - 808736806244
View all HP 630n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Table 3-3 Telnet Commands and Parameters (continued) 0: Disable IPsec/Firewall operation. 1: (Read Only) IPsec/Firewall policies are configured and enabled. ip IP address for the print server. For example: ip-config manual ip 192.168.45.39 In the example, manual signifies manual configuration and ip sets the IP address on the print server. To clear the IP address, set the value to 0.0.0.0. If you change this IP address, you must use it on the next Telnet connection. subnet-mask default-gw Config Server TFTP Server TFTP Filename domain-name pri-dns-svr sec-dns-svr pri-wins-svr sec-wins-svr TCP/IP Print Options 9100-printing Identify the network and host portions of an IPv4 address in received messages. For example: subnet-mask 255.255.255.0 In the example, 255.255.255.0 is stored on the print server. To clear the subnet IP address and disable the mask, set the value to 0.0.0.0. NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change the subnet mask or the default gateway address, you should also change the print server's IP address. This releases the assigned DHCP address back to the DHCP IP address pool. IP address of a default gateway used by the print server. For example: default-gw 192.168.40.1 In the example, 192.168.40.1 is the IP address of the default gateway. NOTE: If the HP Jetdirect print server is configured by DHCP and you manually change the subnet mask or the default gateway address, you should also change the print server's IP address. This releases the assigned DHCP address back to the DHCP IP address pool. (Read only.) IP address of the server (such as a BOOTP or DHCP server) that last configured the IP address on the HP Jetdirect print server. (Read only.) IP address of the TFTP server that provided parameters to the HP Jetdirect print server. (Read only.) Path and TFTP filename on the TFTP server. For example: hpnp/printer1.cfg Domain name for the device. For example: domain-name support.hp.com In the example, support.hp.com is assigned as the domain name. The domain name does not include the host name, and is not the FQDN (such as printer1.support.hp.com). IP address of the primary DNS server. IP address of a secondary DNS server to use if the primary DNS server is unavailable. IP address of the primary WINS server. IP address of the secondary WINS server. Print to TCP port 9100 on the print server. ENWW IPv4 configuration 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
0
: Disable IPsec/Firewall operation.
1
: (Read Only) IPsec/Firewall policies are configured and enabled.
ip
IP address for the print server. For example:
ip-config manual ip 192.168.45.39
In the example,
manual
signifies manual configuration and
ip
sets the IP address on the
print server.
To clear the IP address, set the value to 0.0.0.0.
If you change this IP address, you must use it on the next Telnet connection.
subnet-mask
Identify the network and host portions of an IPv4 address in received messages. For
example:
subnet-mask 255.255.255.0
In the example, 255.255.255.0 is stored on the print server. To clear the subnet IP address
and disable the mask, set the value to 0.0.0.0.
NOTE:
If the HP Jetdirect print server is configured by DHCP and you manually change
the subnet mask or the default gateway address, you should also change the print server's
IP address. This releases the assigned DHCP address back to the DHCP IP address pool.
default-gw
IP address of a default gateway used by the print server. For example:
default-gw 192.168.40.1
In the example, 192.168.40.1 is the IP address of the default gateway.
NOTE:
If the HP Jetdirect print server is configured by DHCP and you manually change
the subnet mask or the default gateway address, you should also change the print server's
IP address. This releases the assigned DHCP address back to the DHCP IP address pool.
Config Server
(Read only.) IP address of the server (such as a BOOTP or DHCP server) that last
configured the IP address on the HP Jetdirect print server.
TFTP Server
(Read only.) IP address of the TFTP server that provided parameters to the HP Jetdirect
print server.
TFTP Filename
(Read only.) Path and TFTP filename on the TFTP server. For example:
hpnp/printer1.cfg
domain-name
Domain name for the device. For example:
domain-name support.hp.com
In the example,
support.hp.com
is assigned as the domain name.
The domain name does not include the host name, and is not the FQDN (such as
printer1.support.hp.com
).
pri-dns-svr
IP address of the primary DNS server.
sec-dns-svr
IP address of a secondary DNS server to use if the primary DNS server is unavailable.
pri-wins-svr
IP address of the primary WINS server.
sec-wins-svr
IP address of the secondary WINS server.
TCP/IP Print Options
9100-printing
Print to TCP port 9100 on the print server.
Table 3-3
Telnet Commands and Parameters (continued)
ENWW
IPv4 configuration
45