HP Designjet 250c Service Manual - Page 141
LEDs Flashing, BlackĆCartridge Alignment Procedure. Instructions
View all HP Designjet 250c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
LEDs Flashing Load Media: The plotter has a file in memory, which it is waiting to plot, but no sheet is loaded. Load a sheet. Flashing 6 Ready: The plotter is busy with a task or is receiving a file. Wait. Flashing 9 Flashing 13 Paper + Error: The current plot is too large and does not fit in memory. D If the plot is a raster plot, try sending it with a no negative motion RTL command. D If it is a vector plot, try using a driver that performs all the rasterization of the plot in the host computer before sending it to the plotter. (See also ' chapter 5, w Memory Usage.) D Otherwise, add more memory by installing a DRAM SIMM. Flashing 23 Cartridges + Error: One or more of the cartridges missing or making bad contact. D Remove each cartridge. Ensure that the protective tape has been removed, and look for dirty contacts or wear. Replace each cartridge and run the BlackĆCartridge Alignment Procedure. (Instructions ' User's Guide, chapter 1.) D Replace the trailing cable. D Replace the carriage. D Replace the electronics module. Cartridges + Ready: The plotter is testing and servicing the cartridges. Wait. Flashing 29 C4699Ć90000 Troubleshooting 8Ć7