HP Designjet 250c Service Manual - Page 77
Reinstalling the Encoder Strip, Temporarily, rest the loose strip safely
View all HP Designjet 250c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
11 Carefully pull the encoder strip to the right, through and out of the carriage assembly. WARNING In the following steps, take care neither to cut yourself on the encoder strip, nor to damage the strip. 3 Feed the encoder strip through the cartridge carriage from right to left. 12 Lay the encoder strip on a flat surface. Reinstalling the Encoder Strip 1 Move the cartridge carriage to the left, over the service station. 2 Ensure that the encoder strip is oriented with the transparent area up, and with two holes on the left side and one hole on the right side. 4 Temporarily, rest the loose strip safely on the drive roller. 5 Slip the left end of the strip over the plastic pin on the left bracket, and press it right to the base of the pin. C4699Ć90000 Removal and Replacement 6Ć19