HP Designjet 5000 HP Designjet 5000 series printer - User's Guide - Page 107
Printed Image Incorrect, The Image is in One Portion of the Printing Area
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Introduction Media & Ink Solutions Solving Problems Image Quality Problems Ink Supply Problems Printed Image Incorrect Front-Panel Printer Options Other Index Media Problems Image Error Other Problems Getting Help For an explanation of rotation for PostScript files, see Rotating an Image. The Image is in One Portion of the Printing Area Is the page size configured in the software too small? Ensure that your software doesn't believe the image to be in one quadrant of the page. Otherwise, this indicates an incompatibility between the software and the printer: Is your software configured for this printer? For general advice, see the Setup Instructions. For advice specific to your software, see the documentation supplied with the driver. If you still haven't found the solution, try changing the printer's Graphics Language setting on the front-panel (Device setup / Lang). The Image is Unexpectedly Rotated Check the front-panel Page format / Rotate setting. For non-PostScript files: If Nesting is ON, pages may be automatically rotated to save media. See Rotating an Image The Print is a Mirror Image of the Original Check the front-panel Page format / Mirroring. The Print is Distorted or Unintelligible The interface cable between your computer and the printer could be faulty. Try another cable to see if the problem is corrected. If you have connected your computer to the parallel port on the printer, make sure you are using a genuine HP parallel interface cable. If the front-panel graphics language setting is Automatic (the default), try the other settings: (PostScript for a PostScript file, HP-GL/2 for an HP-GL/2 file etc.) and send the file again. Depending on the software, drivers and RIPs you are using with your printer, there will be different solutions to solving this problem. Refer to the Vendor's User Documentation for details.