HP Designjet 5000 HP Designjet 5000 series printer - User's Guide - Page 95
Problems Inserting the Ink Supplies, Problems Reseating the Printhead
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Introduction Media & Ink Solutions Front-Panel Printer Options Other Index Solving Problems Image Quality Problems Ink Supply Problems Media Problems Image Error Other Problems Getting Help Problems Inserting the Ink Supplies CAUTION Never clean inside the ink cartridge slots. Problems Reseating the Printhead If you have inserted the printhead into the printhead carriage assembly and the printer does not "beep", perform the following steps. Check that you have removed the protective tape from the printhead. Insert the printhead into the carriage assembly but this time close the cover using the latch. Clean the electrical contacts on both the printheads and the printhead carriage assembly using the carriage interconnect wiper procedure refer to Carriage Interconnect Wiper. Replace the printhead with a new one. Problems Inserting the Ink Cartridge 1. Ensure that you have the correct HP No.81or HP No.83 ink cartridge. 2. Ensure that the cartridge is the correct color for that slot. 3. Ensure that the cartridge is the correct orientation, with the color coded label at the top. Problems Inserting the Printhead 1. Ensure that you have the correct HP No.81 or HP No.83 printhead. 2. Ensure that you have removed the protective cap from the printhead. 3. Ensure that the printhead is the correct color for that slot. 4. Ensure that the printhead is the correct orientation. See the section Printhead Installation for details. Problems Inserting the Printhead Cleaner 1. Ensure that you have the correct HP No.81 or HP No.83 printhead. 2. Ensure that the printhead cleaner is the correct color for that slot. 3. Ensure that the printhead cleaner is the correct orientation. See Printhead Cleaner Installation for details