HP Designjet 5000 HP Designjet 5000 series printer - User's Guide - Page 158

Introduction Media & Ink Solutions Front-Panel Printer Options The Front-Panel Setup Menus Consumable Menus Internal Prints Other Navigation Index Message Descriptions Status Lift window to remove printheads Lift window to replace SETUP printheads Media loaded incorrectly. Remove media. Media misaligned. 1_ Lift lever 2_ Align Media with both edges of roll 3_ Lower lever Media misaligned. 1_ Lift lever 2_ Align right edge with blue line 3_ Lower lever Description You have selected replace printheads and the frontpanel is guiding you through the procedure. The printer is prompting you to lift the window of the printer so that you can install 'normal' printheads into the printer. you must only remove the Setup printheads when you have initialized the printer first. The media is mis-positioned or mis-aligned. The printer is helping you with the load roll media procedure. The media is not being fed into the printer straight. Procedure To see an animation of the printhead installing procedure see Printhead Installation It is vital to the correct functioning of your printer, that the Setup procedure is performed correctly. Use the Setup Instructions which came with your printer to guide you through the steps. Before the printer can continue you must remove the media. See Loading Roll Media. For an animation on the loading roll procedure see Loading Roll Media For guidelines on loading media see Loading Roll Media Guidelines