HP Neoware e90 NeoLinux 4.0 Thin Client User Manual - Page 274
Telnet, Space, Default: UART 16550
View all HP Neoware e90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
Port Mapping Idle timeout When COM port mapping is enabled, this specifies the period of inactivity before the port is automatically shut down. Port type This specifies the port type as Raw or Telnet. You should select Raw for devices that receive data directly, such as printers. Telnet should be selected for devices that interact with the user, such as hosts. Use custom settings Default: Checked Checking this box will enable you to specify general COM port settings using the following options. Speed Default: 9600 This specifies the transmit and receive baud rate. UART Type Default: UART 16550 This specifies the serial port type. Parity Default: none This specifies the parity mode for each transmitted character. If the number of Databits is 8, set this option to None. Selecting Odd will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an even number, and 0 if the previous 7 bits add up to an odd number. Selecting Even will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity will set every eighth bit to 1 and Space parity every bit to 0. 260 COM Port Settings