HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 138

Adaptec SCSI RAID Software Reference Guide container remove global_failover To remove one or more failover disks that were assigned to all arrays through the container set global_failover command, use the container remove global_failover command. Syntax container remove global_failover {scsi_device} [{scsi_device}...] Parameters {scsi_device} Specifies the ID for the SCSI device that you want to remove as a failover disk for all arrays. You previously assigned this SCSI device as a failover disk with the container set global_failover command. See the scsi_device section on page 3-7 for more information on how to specify the SCSI device. {scsi_device}... Specifies the ID(s) for any other SCSI device(s) you want to remove as failover disk(s) for all arrays. You previously assigned these SCSI device(s) as failover disk(s) with the container set global_failover command. Examples Before removing one or more failover disks from all arrays, use the container show failover command to obtain information about any existing failover disks assigned to arrays. As the following example shows, there is an array 0 that has SCSI devices (1,2,0) and (1,3,0) assigned to it. AAC0>container show failover Executing: container show failover container Scsi C:ID:L GLOBAL 1:02:0 1:03:0 0 --- No Devices Assigned --- 5-90