HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 303
The Enclosure Column, The UpTime D:H:M Column, The PowerCycle Column, The Interval Column, Enclosure
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
enclosure Commands ■ Interval ■ Door ■ Alarm The following sections describe the information that the enclosure show status command can display in these columns. For information about the status displays for fans, power supplies, device slots, and temperature sensors see the Related Information section. The Enclosure Column The Enclosure column displays the ID associated with the enclosure management device that you specified on the command line. If you did not specify an ID, the enclosure show status command displays the IDs for all enclosure management devices connected to the controller. The UpTime D:H:M Column The UpTime D:H:M column displays the total time (days:hours:minutes) that the enclosure management device has been running. This count is cumulative over the life of the enclosure management device. The PowerCycle Column The PowerCycle column displays the number of times a user has powered on the enclosure management device. In the example, a user powered on enclosure management device 0 two times and enclosure management device 1 three times. This count is cumulative over the life of the enclosure management device. The Interval Column The Interval column displays the monitor interval. You can set the monitor interval with the enclosure set interval command. In the example, the monitor interval reporting level for both enclosure management devices is 20 seconds. 11-39