HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 52
Related Information, Num Label
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Adaptec SCSI RAID Software Reference Guide Use the container list command after using the container add_level command to display information about the multilevel volume set, as in the following example: AAC0>container list Executing: container list Num Total Oth Stripe Scsi Partition Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size 0 Volume 45MB None 63 Stripe 45MB 32KB 0:02:0 64.0KB: 15.0MB 0:03:0 64.0KB: 15.0MB 0:04:0 64.0KB: 15.0MB The following list describes the change to the display as a result of creating a multilevel volume set with the container add_level command: ■ The Num Label column displays two ID numbers. The first ID (0) is the newly created volume set. The second ID (63) is the original array (the stripe set). If you specified a label when creating the multilevel volume set, it appears in this column. Because no label was specified when the multilevel volume set was created, no label appears in the column. ■ The Type column displays two array types: Volume and Stripe. The Volume array type indicates that the newly created array is a volume set. This is the array created after the container add_level command completes. The Stripe array type indicates the array whose ID was specified to the container add_level command. This is the original array previously created with the container create stripe command. Related Information container commands: ■ container extend mvolume (page 5-46) ■ container list (page 5-54) ■ container promote (page 5-69) 5-4