HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 254

Adaptec SCSI RAID Software Reference Guide Table 10-1. Task Types (Continued) Task Type NTFSfmt Rebuild Reconfg Scrub Unknown Meaning An array format NTFS file system task is running on the specified array. The format NTFS file system task runs as a result of using the array format command with the / file_system switch set to NTFS. A rebuild task is running on the specified array. Typically, the rebuild task runs when the controller is in a rebuild of a redundant array (RAID-5 set, mirror set, or multilevel array of mirror sets). An array reconfigure task is running on the specified array. When the array reconfigure task completes, the specified array becomes a different array (for example, from a volume set to a stripe set). The array reconfigure task runs as a result of using the array reconfigure command. A scrub task is running on the specified redundant array. When the scrub task completes, the specified redundant array has reconstructed data on one partition based on data found on the other partition (for mirror sets and multilevel arrays of mirror sets). Or, the specified redundant array recalculates and replaces, if necessary, the parity information (for RAID-5 sets). The scrub task runs as a result of the array scrub command. The scrub task also runs as a result of the array create raid5 command with the /scrub switch specified. This is the task type displayed in the example. An unknown task is running. 10-4