HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 313
Running the AFU, Accessing the AFU from the GUI, Select Controllers, Select an Operation
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
Using the Adaptec Flash Utility 2 Create a bootable MS-DOS floppy diskette and copy the following files to this diskette: ■ AFU.exe ■ AC2xx001.ufi where 2xx0 is the model number of your controller. 3 Copy the remaining UFI files to additional diskettes. Running the AFU You can run the AFU from its graphical user interface (GUI) or from the command line. Accessing the AFU from the GUI To access the AFU GUI: 1 At the DOS command prompt (typically A:\>), type AFU with no arguments. The main menu to the AFU GUI, which is self-explanatory, is displayed. 2 Select Select Controllers and select the controller(s) to be flashed. 3 Select Select an Operation. 4 Select any available AFU function and follow the on-screen instructions. Accessing the AFU from the Command Line At the DOS command prompt (typically A:\>), enter the command AFU followed by a command keyword and any optional switches. The AFU processes your command with no further interaction1 and then exits with the status "success" or a specific error message code. The syntax of the AFU command line is as follows: AFU [/C] [/D ] [/?] In this command line: 1 The AFU will prompt you to insert additional floppy diskettes as required. 12-5