HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 93

container Commands 3 Assign a drive letter to the volume set created in Step 1 with the container assign drive_letter command. 4 Create an NTFS file system on the volume set created in Step 1 with the container format command. 5 Create a second volume set of 100 MB on disk (1,1,0) with the container create volume command. 6 Create a third volume set of 100 MB on disk (1,2,0) with the container create volume command. 7 Used the container extend mvolume command to add the arrays created in Steps 5 and 6 to the array created in Step 1. The following example extends the NTFS file system to make use of the additional arrays: AAC0>container extend file_system 0 Executing: container extend file_system 0 The system has been marked to expand the file system on the next reboot. Reboot the system to get the file system to expand to show the new space. Use the container list command after using the container extend file_system command to display information about the array after you extend a file system. Note that there is no change in the display as a result of using the container extend file_system command. Related Information container commands: ■ container format (page 5-54) 5-45